Product families
Indoor fiber infrastructure, configured for the deployment.
Five families covering the indoor pathway from cable to termination. Each is configured per project rather than sold from a fixed catalog, so the specification is agreed before anything is built.
Scope is deliberately limited to indoor data center environments — pathways, cabinets, cross-connect spaces, and high-density termination.
How specifications are published
This page publishes the product families ORBNEX Optic supplies and the options each one is configured against. Technical values are published once the supporting manufacturer documentation has been reviewed and approved, so nothing here should be read as a specification or a compliance claim.
Infrastructure catalog
Select a family to see how it is configured.
Every family below is built to a project specification — fiber type, count, jacket, connector, length, polarity, and labeling are agreed before manufacture.
SELECT_FAMILY_FOR_DEPLOYMENT
CAT-01
Indoor Fiber Cable
Distribution, tight-buffer, breakout, ribbon, and micro-distribution constructions for indoor pathways.
Explore Product Family
CAT-02
Pre-Terminated Fiber Assemblies
Factory-terminated trunks and harnesses built to project length, polarity, and labeling requirements.
Explore Product Family
CAT-03
Patch Cords
Duplex and simplex jumpers in the connector combinations used across data center cabinets.
Explore Product Family
CAT-04
Fiber Connectivity
Panels, cassettes, enclosures, and management hardware that terminate and organise the plant.
Explore Product Family
CAT-05
Custom Optical Solutions
Project-specific constructions, labeling schemes, serialisation, and packaging built around a deployment plan.
Explore Product Family
CAT-01
Indoor Fiber Cable
Distribution, tight-buffer, breakout, ribbon, and micro-distribution constructions for indoor pathways.
- Indoor distribution cable
- Indoor tight-buffer cable
- Indoor breakout cable
- Indoor ribbon and rollable-ribbon cable
- Indoor micro-distribution cable
CAT-02
Pre-Terminated Fiber Assemblies
Factory-terminated trunks and harnesses built to project length, polarity, and labeling requirements.
- MPO/MTP trunk assemblies
- LC trunk assemblies
- LC-to-MPO assemblies
- Harness assemblies
- High-density data center trunks
CAT-03
Patch Cords
Duplex and simplex jumpers in the connector combinations used across data center cabinets.
- LC-LC
- LC-SC
- SC-SC
- MPO/MTP
- Duplex and simplex
CAT-04
Fiber Connectivity
Panels, cassettes, enclosures, and management hardware that terminate and organise the plant.
- Adapter panels and cassettes
- Enclosures and patch panels
- High-density chassis
- Splice trays
- Cable-management accessories
CAT-05
Custom Optical Solutions
Project-specific constructions, labeling schemes, serialisation, and packaging built around a deployment plan.
- Custom fiber counts and lengths
- Custom polarity and connector configuration
- Custom jacket printing and labeling
- Serialized assemblies
- Pre-labeled deployment kits
Configurable options
What is specified on a project.
These are the parameters an ORBNEX Optic configuration is built around. Published values are shown only where supporting documentation has been reviewed and approved.
| Parameter | Specified per project | Published value |
|---|---|---|
| Fiber mode | Single-mode and multi-mode options can be specified per project. | Pending approved documentation |
| Fiber count | Strand count is specified per project and per assembly. | Pending approved documentation |
| Jacket | Riser, plenum, and LSZH jacket options can be specified per project. | Pending approved documentation |
| Connector | LC, SC, and MPO/MTP interfaces can be specified, including hybrid combinations. | Pending approved documentation |
| Length | Assemblies are built to project length rather than cut from stock lengths. | Pending approved documentation |
| Polarity | Polarity method is specified to match the cabling plan. | Pending approved documentation |
| Labeling | Custom jacket printing, sequential numbering, and per-assembly identifiers. | Pending approved documentation |
| Packaging | Grouped by cabinet, room, row, or deployment phase. | Pending approved documentation |
Technical information
Documentation is released on request, once approved.
ORBNEX Optic is developing a documented qualification and traceability framework for approved products and manufacturing partners. Drawings, construction details, and test documentation are provided against a specific configuration rather than published as a general catalog.
Configuration first
Send a bill of materials, cable schedule, or port map and the response is a configuration against your requirements, not a stock list.
Documented on release
Technical documentation is issued for the configuration that was agreed, with its revision and issue date recorded.
Nothing published early
A specification is not shown on this site until its supporting documentation has been reviewed and approved.
Next step
Send a requirement and get a configuration back.
Requirements, bills of materials, cable schedules, drawings, and port maps can be sent directly. Engineering will respond with a configuration and a quotation.